Supplies: Silicone O-Ring, 70A Durometer, Red

Cross Section Shape	Round
Upper Temperature Range	450  Degrees Fahrenheit
Hardness	70 A Durometer
Specification Met	AS568A
Color Name	Red
Material Type	Silicone Rubber
Brand Name	Small Parts
LowerTemperature Range	-65  Degrees Fahrenheit
System of Measurement	Inch

Key Options

    Fabricated from silicone for use with quite a lot of chemicals and fluids
    Can be utilized throughout a wide temperature range from -sixty five levels F (-54 degrees C) to 450 degrees F (232 degrees C)
    Round in cross-section to offer a seal between cylindrical overlapping surfaces
    Durometer (hardness) of 70A for resistance to penetration
    Meets requirements defined by Aerospace Standard AS568A

Product Description

This silicone O-ring is red in colour, spherical in shape, has a durometer of 7OA, and is designed to be used in a wide variety of sealing applications.

Silicone is appropriate for temperature applications between -65 degrees F (-54 levels C) to 450 levels F (232 levels C). It has good resistance to ozone, weather, detergent, salt water, engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, and high molecular weight chlorinated fragrant hydrocarbons. Silicone is weak to mechanical put on and tear, water and steam over 250 degrees F (121 levels C), fragrant hydrocarbons (benzene), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels.

O-rings commonly provide a pressure and fluid seal between cylindrically formed, overlapping mating surfaces and are commonly seen in engines, taps, flanges, valves, and varied cylinders. They're circular in form, with a round cross part and a gap within the heart, just like a doughnut. O-rings are available in a number of sizes, and could be ordered primarily based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter.

This silicone O-ring has a shore durometer of 70A. Shore durometer is the hardness of a cloth, and its resistance to permanent indentation. A better durometer value indicates greater resistance to indentation on a scale of 0 to a hundred, with one hundred indicating no indentation.

This silicone O-ring meets standards outlined by Aerospace Standard AS568A, which is the Aerospace Size Commonplace for O-rings.

Supplies : 304 Stainless Steel Wire

Product Specifications

Brand Name

Small Parts

Part Number

GWX-0380-60-05

Overall Length

60  inches

Length Tolerance

+/-0.25  inches

Indentation Hardness

57  Rockwell C

LowerTemperature Range

0  Degrees Fahrenheit

Outer Diameter

0.038  inches

Outside Diameter Tolerance

+/-0.0004  inches

Pkg Qty

5

Production Method

Straightened & Cut

Tensile Strength Max

289500  PSI

Upper Temperature Range

570  Degrees Fahrenheit

Finish

Unpolished (Mill)

Item Shape

Wire

Specification Met

ASTM A313

Temper

Spring

Material Composition

Solid

Grade

304

Material Type

Stainless Steel

System of Measurement

Inch

Key Options

    304 stainless-steel wire offers a mix of corrosion resistance, weldability, and formability
    Spring temper is stiff and spring like, resisting bends and kinks till a large amount of drive is utilized
    Unpolished (mill) surface has no end
    Precision tolerance
    Meets ASTM A313 specs

Bundle Details

Delivery Weight: 0.22 kilos
Package deal Measurement: 60.5 x 0.5 x 0.5 inches
Product Description

The 304 chrome steel wire has a spring temper, an unpolished (mill) finish, and a precision tolerance, and meets American Society for Testing and Materials International ASTM A313 specifications. The 304 chrome steel grade is a general-goal material that mixes corrosion resistance, weldability, and formability, making it the most generally used grade of stainless steel. The fabric may be barely magnetic and will be chilly labored for elevated strength and rigidity. The spring temper is stiff and spring like, resisting bends and kinks till a considerable amount of pressure is applied.

Stainless steel is an iron alloy with resistance to staining and rusting in many environments the place metal would typically degrade. The chemical composition of each grade creates a grain construction that falls into certainly one of five courses: austenitic, duplex, ferritic, martensitic, and precipitation hardening. The austenitic class accommodates the most formable, weldable, and corrosion-resistant stainless steel grades, however they can't be warmth treated.

Tensile energy, used to indicate the fabric’s general power, is the height stress it will probably stand up to earlier than it breaks. Corrosion resistance describes the fabric's potential to stop deterioration caused by atmosphere, moisture, or other medium. Toughness describes the fabric's skill to soak up vitality earlier than breaking, whereas hardness (commonly measured as indentation hardness) describes its resistance to everlasting surface deformation. Formability indicates how simply the material can be completely shaped. Magnetism characterizes how a lot the fabric is repelled by or drawn to a magnet.

Reviews From Customer

Stainless Steel Sort 304V Wire (ASTM A313) is spring tempered, drawn, straightened, cut and cleaned with a bright finish.It's used for dental wire, stylets, information wires and catheter wires. Type 304V (Vacuum Arc Remelted) is formulated much like business high quality stainless steel, but it surely has been refined by melting or remelting in a vacuum, a process that segregates the soften from oxygen, nitrogen and other ambient gases, leading to a cleaner, greater-quality, more pure stainless steel. This contributes to the extra shiny end, clean and gun-barrel straight features. Some sizes match inside diameters of our Hypodermic Tubing. NOTE: When ordering wire, at all times specify exact dimensions in decimals. Stating gauge sizes can lead to confusion, since wire diameters may conform to varied gauging systems. Hypodermic Tubing gauges are based on the Birmingham Gage, also known as Stub's Iron Wire Gage

Construction Supplies : 4130 Alloy Steel Round Rod, Annealed/Rough Turned, Standard Tolerance

 

Product Specifications

Brand Name

Small Parts

Part Number

7379

Thickness

3  inches

Overall Length

36  inches

Length Tolerance

+0.125/-0  inches

Indentation Hardness

82-92 rockwell_b

Outer Diameter

3  inches

Outside Diameter Tolerance

+/-0.004  inches

Pkg Qty

1

Production Method

Annealed , Rough Turned

Tensile Strength Max

97200  PSI

Item Shape

Round Rod

Material Type

Alloy Steel

Grade

4130

Temper

0 (Annealed)

System of Measurement

Inch

Specification Met

AMS 6370 , AMS S-6758

Material Composition

Solid 

 

Product Description

The 4130 alloy steel spherical rod has been rough turned and annealed, meets SAE Aerospace Materials Specs AMS 6370 and AMS S-6758 standards, and has a typical tolerance. The 4130 alloy steel grade comprises chromium and molybdenum for power and hardenability, with decrease carbon content than 4140 alloy steel to offer better weldability. This material might be warmth treated for higher hardness. The rod has been tough turned, a process of constantly slicing the outside diameter of a cylindrical shape because it spins, to remove surface contaminants and imperfections as well as to realize the specified outside diameter. The material has been annealed, a technique of heating and cooling metallic to switch its properties, equivalent to rising its formability and toughness or reducing its power, after it has been shaped.

Steel is an iron alloy with carbon and different parts that modify the steel to realize specific properties. Usually, steels with greater carbon content have higher power, hardness, and put on resistance, while those with lower carbon content have extra formability, weldability, and toughness. Carbon steels, which embody most AISI-SAE grades in the a thousand range, are labeled by their degree of carbon content material as low (beneath 0.three%), medium (0.three% to 0.6%) and excessive (0.6% and above). Alloy steels, which embody AISI-SAE grades within the 1300 and 4000 ranges and above, incorporate components such as chromium, molybdenum, and nickel to switch properties like machinability and corrosion resistance. Software steels, which embrace most grades with a letter and number grade designation, have excessive carbide content for put on resistance, excessive hardness, and the ability to carry a cutting edge. Some software steels are designed to resist deformation when used in elevated temperatures.

Tensile energy, used to indicate a fabric’s overall energy, is the peak stress it may possibly face up to before it breaks. Wear resistance indicates the flexibility to prevent floor injury attributable to contact with different surfaces. Toughness describes the fabric's potential to absorb energy earlier than breaking, whereas hardness (generally measured as indentation hardness) describes its resistance to permanent surface deformation. Formability indicates how simply the fabric may be completely shaped. Machinability describes how simply it may be reduce, formed, completed, or in any other case machined, while weldability characterizes the power to be welded.

Product Options
- 4130 alloy metal has good power and hardenability, and supplies higher weldability than 4140 alloy steel

- Meets AMS 6370 and AMS S-6758 specifications

- Rough turned to take away surface contaminants and imperfections and to achieve the required outdoors diameter

- Annealed after shaping to modify the steel's properties
    Normal tolerance

- Shipping Weight: 72 pounds
- Shipping: At present, merchandise will be shipped only inside the U.S.